Contents 1 Important Safety Recycling 2 Your SDV7220/12 Overview 3 Get started Installation 4 Set up the SDV7220/12 Set up on the table Assemble antenna and stand Mount on the wall Set up a digital tuner with this antenna 5 Frequently asked questions 6 Warranty and Service 7 Glossary...
2 Your SDV7220/12 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Overview UHF antenna Coaxial cable 1.8m (to amplifier connection) Antenna stand Amplifier Coaxial cable 1.2m (to TV connection) LED power indicator 3-stage gain control switch...
3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an antenna instead of cable. Installation Determine the signal strength Before Installation, determine the best location for optimum reception.
4 Set up the SDV7220/12 Set up on the table The antenna can be used with or without the included stand as below. Slide the gain control switch of the amplifier towards the max. position. Note • It is possible to slide the gain control switch towards the min.
Mount on the wall Mount two wood screws into the wall with 80mm (3.149") of center distance. Plug the plastic bracket into two notches on the rear housing, then push it up to lock in. Attach the plastic bracket to the wood screws on the wall.
(see 'Set up a digital tuner with this antenna' on page 8) 6 Warranty and Service Warranty information can also be found at: www.philips.com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips.com...
7 Glossary Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gain, i.e. it makes small signals larger. Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal.