Set Up The Sdv7220/12; Set Up On The Table; Assemble Antenna And Stand - Philips SDV7220/12 User Manual

4 Set up the
SDV7220/12

Set up on the table

1
The antenna can be used with or without
the included stand as below.
2
Slide the gain control switch of the
amplifier towards the max. position.
Note
•
It is possible to slide the gain control switch towards
the min. position or remove the amplifier for best
reception.

Assemble antenna and stand

1
Unwrap the stand from the tablet of
antenna.
2
Position the stand to the notches of the
antenna.
3
Slide the stand to fix it on the antenna.
Tip
•
To disassemble the stand, reverse the assembly
procedure.
EN
7