Streck ESR-Auto Plus Dismantling Manualline

®
ESR-Auto Plus and ESR-657 Mixer Dismantling Guideline
Jan. 2009, 880010-1
SOURCE: Streck
Information in this guideline is subject to change without notice. No part of this publication may be
reproduced or distributed in any form or by any means, electronic or mechanical, for any purpose, without
the express written permission of Streck. Streck provides this guideline for qualified technicians who
must dismantle the ESR-Auto Plus and/or ESR-657 Mixer.
TRADEMARKS
Streck brand and product names are service marks, trademarks or registered trademarks of Streck in the
United States and other countries. All other marks are the property of their respective owners.
DISCLAIMER
The products and specifications, configurations, and other technical information regarding the products
contained in this guideline are subject to change without notice. All the statements, technical information,
and recommendations contained in this guideline are believed to be accurate and reliable but are
presented without warranty of any kind, and users must take full responsibility for the application of any
products specified in this guideline. In no event shall Streck or its suppliers be liable for any indirect,
special, consequential, or incidental damages, including, without limitation, lost profits or loss or damage
to data or property arising out of the use or inability to use this guideline, even if Streck has been advised
of the possibility of such damages.
SPECIAL INSTRUCTIONS
Streck emphasizes the importance of following all procedures described in this guideline, to prevent
personal injury. The user should pay careful attention to sections that contain the following:
CONTACT INFORMATION
If you have questions regarding our products you can contact us directly:
Streck Technical Services
+1.402.333.1982
Streck
7002 South 109th Street
Omaha, NE USA 68128
Note: Information presented in this format is very important in
the associated context. Please pay particular attention to text
conveyed as a Note.
Warning: Information presented in this format identifies a
potentially dangerous situation involving electrical circuitry.
Use the advice in this text to avoid bodily injury.
Special Handling: Information presented in this format
indicates special care must be applied when disposing or
recycling the component.
i