Definitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DWE4118 Original Instructions Manual

ANGLE GRINDERS
DWE4118
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most
reliable partners for professional power tool users.
Technical Data
Voltage
Type
Power input
No-load/rated speed
Wheel diameter
Grinding Wheel thickness
Wheel Type
Spindle diameter
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
DWE4118
signal word. Please read the manual and pay attention to these
V 230
AC
symbols.

1
W 950
min -1 3 000–11 000

mm 115
mm 6
27

M14
kg 1.8
dB(A) 90.0

dB(A) 101.0
dB(A) 3

m/s 9.8
2
m/s 1.5
2
DEWALT declares that these products described under Technical
Data are in compliance with: 2006/42/EC, EN60745-1:2009
+A11:2010, EN60745-2-3:2011+A2:2013+A11:2014+A12:2014
These products also comply with Directive 2014/30/EUand
2011/65/EU. For more information, please contact DEWALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of DEWALT.
10 Amperes, mains
13 Amperes, in plugs
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
ANGLE GRINDERS
DWE4118
DEWALT, Richard-Klinger-Straße 11,
WARNING: To reduce the risk of injury, read the
instruction manual.
ENGLISH
Markus Rompel
Director Engineering
D-65510, Idstein, Germany
30.11.2015
5