Advertisement
Available languages
Available languages
A
Receiver
TV2
1
4
2
SCART cable
3
ANT
Receiver unit
DC 9V
Channel
1 2 3 4
SCART OUT
B
Transmitter
TV1
5
SCART cables
10
4
6
3
7
ANT
SCART OUT 1
SCART OUT 2
DC 9V
IR
Channel
AV
AV
1 2 3 4
2
SCART 1
SCART 2
SCART IN 1
SCART IN 2
8
1
9
Set-top box / DVD
VCR / DVD
C
Aligned
Wireless TV Link
Transmitter
VCR / DVD
Set-top box / DVD
vl1200Foldoutnew.p65
2
Congratulations
The Philips Wireless TV link SBC VL1200 you have just purchased is manufactured to the highest
standards and will give you years of trouble-free use. Please read the following instructions carefully,
and retain this booklet for future reference.
8
The Philips Wireless TV link SBC VL1200 allows you to distribute any kind of video signal, and any
cable programme (via your VCR, connected to the Wireless TV Link) throughout the house without the
need for extra wiring. For example, you can enjoy the freedom of watching Pay-TV or a film from your
5
6
7
living-room video recorder on your bedroom TV.
In fact, you can view any video source (digital or analogue set-top boxes, DVDs, satellite receivers,
VCRs etc.) on your second TV, no matter what room it's in. The signal goes through walls and ceilings
so there is no need for running cables or drilling holes.
PHILIPS
The dual source input allows you to directly connect any two video devices for easy switching between
POWER
sources. You can enjoy your favourite programmes on a second TV while others watch their favourite
programmes on the main TV.
The Philips Wireless TV Link is based on wireless RF technology that offers you freedom of movement
and convenience. Because it is wireless it is more susceptible to outside interference than for instance
cabled signals. This interference may come from sources that include microwave ovens or other TV
Links in the vicinity. To enable you to enjoy the best possible performance, the Philips Wireless TV Link
has a channel selector switch, which enables you to select the channel that provides optimum viewing.
Box contents
•
Wireless TV Link Transmitter unit.
•
Wireless TV Link Receiver unit.
15
•
Two SCART cables.
•
Remote control extender cord.
•
Two AC power adapters 230V AC, 50 Hz; output voltage 9V DC, 300mA.
11
12
13
14
•
This 'Instructions for Use' booklet.
Requirements
PHILIPS
POWER
INPUT 1
INPUT 2
A SCART connector on each video source, the main TV and the second TV. If you intend to use a second
video source, you have to purchase additional SCART cable for it.
• Do not use this product in moist places or close to water.
• Do not expose this product to extreme heat.
• Do not open this product; in case of technical difficulties bring it to your Philips retailer.
• Do not cover this product.
• Only connect the AC power adapters to a power supply of 220-240 V AC / 50Hz.
• Only use the AC power adapters included or a type that complies with safety standard EN60950
and that has the following specification: 9 Volt DC / 300mA.
Your product and its environment; inadequately protected or sensitive electronic equipment may be
affected by the use of this product. This interference can lead to damage to either equipment. Please
check whether or not surrounding equipment can be affected by this product before you start using it.
Rear
S
P
AFETY
RECAUTIONS
08/02/2002, 14:50
!
Helpline
Ελλάς
European Regulations
This product has been designed, tested and manufactured according to the European R&TTE Directive
1999/5/EC. Following this Directive, this product can be brought into service in the following states:
SBC VL1200/86 & SBC VL1200/85
SBC VL1200/19
R&TTE Directive 1999/5/EC
R&TTE Directive 1999/5/EC
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SBC VL1200/05
SBC VL1200/16
R&TTE Directive 1999/5/EC
R&TTE Directive 1999/5/EC
✔
✔
✔
✔
0682
Advertisement
