Answering A Call - ausdom AH861 User Manual

Wireless Headset
Note: There will be a prompt voice when first pairing.
6. Making and Answering a Call
6-1 Making a call
1. Make sure the headphone is pairing to the mobile phone.
Dial through the mobile phone and press the call button on the
phone.
2. To end a call, press the power button once again or also end
the call directly by the phone.

6-2 Answering a call

Make sure the Headphone is pairing with your phone. Please
refer to chapter 5. Pairing with Wireless devices.
1. When a call is incoming. The LED flashes red twice every
second.
2. Press the power button on your headphone or the answer
button on your phone to answer the call. If there is the music
playback, it will pause.
3. To end a call, press the power button once again or also end
the call directly by the phone.
4. As soon as the call is ended, the music will continue to play
automatically.
Note:
The microphone can't work when using as wired headphone.
Only the primary headphone can answer the call when using
ShareMe function.
7. Using a Wired Headphone
The AH861 provides a 3.5mm audio jack located on the side
of ear cup and an included audio cable for wired use. This
allows you to use the audio function with other devices without
having Wireless or charge the battery through the audio cable
when the battery power is low.
Note: The microphone can't work when using as wired
headphone.
6
English