ausdom AH861 User Manual page 4

Wireless Headset English
4. Do not place both devices more than one meter away from
each other.
5. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
the power button until you see the LED indicator flashes blue
and red alternately, which means your headphone is in"pairing
mode"waiting to be paired with your device.
6. As soon as the system detects the new device and select
"AUSDOM AH861". Once successfully paired, the LED turns
to solid blue. You will hear "Pairing successful, connected".
5-2 Pairing the headphones with a phone
1. Make sure the headphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on the
power button until you see the LED indicator flashes blue and red
alternately, which means your headphone is in"pairing
mode"waiting to be paired with your device.
4. Start Wireless function on your phone and search for new
devices.
5. Select the "AUSDOM AH861" to pair. Once successfully
paired, the LED turns to solid blue. You will hear "Pairing
successful, connected".
5-3 ShareMe function
The music or audio program will be shared among two
headphones and the Wireless-enabled device simultaneously.
1. Make sure the headphones and the connected Wireless-
enabled device are off.
2. Do not place all devices more than one meter away from
each other.
3. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
3