Advertisement
MENU 2
Measured temperature correction
- 5°C <
(-5°C à +5°C par pas de 0,1°C).
Example: If the temperature displayed
Before changing this setting,
on the device is 19°C and the
the device must have been in
observed temperature is 20°C,
operation for at least 2 hours.
adjust the temperature by +1°C, then
confirm by pressing OK.
Temperature displayed in AUTO mode
0 : Continuous display of the
temperature setting.
In this case, press the i
button to display the room temperature
1 : Continuous display of the
room temperature.
In this case, press the i button
to display the temperature setting.
>5s
2
1
Turn the selector dial to
then press the i button for 5
seconds.
Time display mode
12h-24h
< +5°C
Automatic time change
(summer/winter time)
3
Press button 2.
To change the different settings, press the + or - but-
tons, then press the OK button to confirm and move
on to the next setting.
,
24h
12h
1
1
4
0
0
5
Minutes
Control time base
Minutes
If you choose an "on/off" type setting,
Minutes
you can adjust the hysteresis
(or differential) via menu 2-11
Minutes
On/Off
0,2°C <
Resetting the boiler operating time
meter
EXIT
To exit the mode,
turn the selector dial
to another mode.
Hysteresis
< 2°C
0,4°C
No
Yes
Advertisement
