Matsui M1DVD12E Quick Start Manual

D V D P L AYE R
Q U I C K S TA R T G U I D E
GB
Thank you
for purchasing your new Matsui DVD Player.
Please follow this quick start guide for a successful rst time set up.
We recommend that you spend some time reading the instruction manual in order
to fully understand all the operational features it o ers.
Read all the safety instructions carefully before use and keep the instruction manual
for future reference.
1 1

Unpacking

Remove all packaging from the DVD player. Retain the packaging. If you dispose of it
please do so according to any local regulations.
DVD Player
Instruction Manual Quick Start Guide
2 2
M 1 D V D 1 2 E
Operating Your Remote Control
1. Press and lift the back cover up to open the battery compartment of the remote
control.
2. Insert two AAA size batteries. Make sure to match the (+) and (–) ends of the battery
compartment.
3. Close the battery compartment cover.
3 3
Connections
Remote Control
POWER OPEN/CLOSE
1 2 3
4 5 6
7 8 9
ZOOM V-MODE
0
MENU Audio Device
SUBTITLE AUDIO REPEAT
TITLE ANGLE PROG
SETUP STOP PLAY/PAUSE
OK
REV FWD VOL+
PREV NEXT VOL–
MUTE GOTO DISPLAY
COAXIAL Cable
(not included)
Television
To Scart input
COAXIAL SCART OUT
SCART Cable
(not included)
To Scart output
4 4

Connecting to the Mains Socket

Connect the mains cable to the mains socket. The unit will enter STANDBY mode.
LED indicator will illuminate red.
• Press the POWER button to switch the unit on.
To the mains socket
5 5

Basic Operation

1. Press the OPEN/CLOSE button to open the disc tray, place a disc into the disc
tray with the label facing up.
• For a double-sided disc, load the side which you want to play facing down.
• There are two di erent disc sizes. Place the disc in the correct guide on the disc
tray. If the disc is out of the guide, it may damage the disc and cause the DVD
player to malfunction.
• Do not place a disc which is unplayable in this DVD player.
2. Press the OPEN/CLOSE button to close the disc tray, the playback will
automatically start.
• Some discs may not playback automatically, you can press the PLAY/ PAUSE
button to start playback.
3. Depending on the disc, a menu may appear on the TV screen by pressing and
holding the ZOOM/MENU button on the remote control. Press the
buttons on the remote control to select menu options and press the OK button
on the remote control to start, or press digits to select a menu option directly.
Well done,
your new DVD Player is now ready to use.
You will nd that there are many exciting features available. To get to know all these
features, please take some time to read the instruction manual provided with your
DVD Player.
(P.N.: 40312101810)