When the smart access system with
push-button start is deactivated in custom-
ization setting, the engine switch will turn
to ACCESSORY mode.
3
Firmly depress the brake pedal and
check that
is shown on the
multi-information display.
4
Press the engine switch shortly and
firmly.
In the event that the engine still cannot
be started, contact your Lexus dealer.
■
Stopping the engine
Shift the shift lever to P, set the parking
brake, and press the engine switch as you
normally do when stopping the engine.
■
Replacing the key battery
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.389)
Changing engine switch modes
■
Release the brake pedal and press the
3
engine switch in step
above. The engine
does not start and modes will be changed
each time the switch is pressed. (P.179)
7-2. Steps to take in an emergency
If the vehicle battery is dis-
charged
The following procedures may be
used to start the engine if the vehi-
cle's battery is discharged.
You can also call your Lexus dealer
or a qualified repair shop.
443
7