Relay
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
CHANGING A FUSE
WARNINGS
Do not modify the electrical system
of your vehicle in any way. Have
repairs to the electrical system and
the replacement of relays and high current
fuses carried out by an authorized dealer.
Switch the ignition and all electrical
equipment off before attempting to
change a fuse.
Always replace a fuse with one that
has the specified amperage rating.
Using a fuse with a higher amperage
rating can cause severe wire damage and
could start a fire.
Fiesta (CC3) Vehicles Built From: 14-07-2014, Australia, enAUS
Fuses
Ignition
Cigar lighter, front auxiliary power point
Not used
Active city stop
Not used
Keyless entry (accessory)
Keyless entry (ignition)
Rear auxiliary power point
Not used
Not used
Not used
Not used
E142430
If electrical components in your vehicle are
not working, a fuse may have blown. A
break in the fuse wire will indicate a blown
fuse. Check the appropriate fuses before
replacing any electrical components.
117
Circuits switched