Maintenance; Schedule - Cannondale LEFTY SPEED DLR2 Owner's Manual Supplement

maintenance schedule
Fork maintenance is important to your safety and longtime performance of the fork. The
following table is intended as a guide to establishing a schedule appropriate to your riding
style and conditions.
Clean fork and visually inspect for damage. Check the fork
externally for any sign of damage (e.g., bent fork, cracks, fluid
leaks, tears, deep scratches, loose parts).
Check and adjust air pressure.
Check the fork function. Make sure it operates normally and
all adjustments are normal. See Fork Problems next page
Inspect the fork boot. Check damage (e.g., cuts, holes, rips, rub
marks, and loose attachment).
Check tightening torque of the fasteners and bolts listed in
Tightening Torques in this manual.
Grease telescope.
Needle bearing reset*
Clean air filter
Damping cartridge oil and seal change*
Inspect, Replace Bumper
PROFESSIONAL SERVICE*
Annually, or when problems are indicated you must have
your Lefty fork serviced through a Cannondale Dealer or an
Authorized Headshok Service Center. Your fork should be
disassembled by a suspension professional and evaluated for
interal and external part wear and damaged parts replaced
with new ones. It should also include any work described in
technical bulletins or product recalls.
Our "Factory Tech Room," (in the USA) provides professional services through Cannondale
dealers for Headshok suspension forks . Please ask your dealer about the service programs
available for your model fork.
WHAT TO DO?
NORMAL
BEFORE AND AFTER EVERY RIDE
50
25
25
100
ANNUAL (Minimum)
14
RACE
(In Hours)
25
25
10
25
AS NEEDED