Air Filter; Frame Bumper - Cannondale LEFTY SPEED DLR2 Owner's Manual Supplement

Air Filter

The air filter assembly is located over two
holes in the outer tube. Air passes in and
out of the ports as the fork moves.
The air filter assembly stops the passage
of dirt and water which would damage the
internal fork components.
The small holes (a) at the base of the air
filter cover should remain open.
The foam filter element (1) should be
cleaned and re-oiled frequently.
The small holes at the base of the filter
cover should be positioned to the sides
of the and not to the front or back of the
bicycle to minimize the chance dirt thrown
by the wheels will plug the holes.
Clean the foam air filter element with
warm soapy water, allow to dry completely,
and reapply a high-quality foam air filter oil
before reinstallation. Be sure to massage
the oil into the foam. A foam element
without the oil is ineffective.

Frame Bumper

The frame bumper (1) located on the outer
tube (2) between the clamp cushions the
frame from contact with the fork. Replace
it with a new one if it ever becomes
damaged, torn, or missing.
Use air filter
oil foam.
FOAM ELEMENT
17
120025.PDF
COVER