Maintenance; Schedule - Cannondale 2011 LEFTY 126564.PDF Owner's Manual

MAINTENANCE SCHEDULE
This schedule is intended as a guide only. You must establish a schedule appropriate to your riding style and conditions.
CHECK FOR DAMAGE - See page 3.
BOOT INSPECTION - See page 18.
TIGHTENING TORQUE CHECK - Use a torque wrench:
Upper/lower clamp bolts:
Wheel axle bolt: 15.0 Nm, 133.0 In Lbs
CLEAN/RE-OIL AIR FILTER - See page 18.
CLEAN/ RE-GREASE TELESCOPE - See page 20.
NEEDLE BEARING RESET * See page 21.
Damping cartridge oil and seal change *
Inspect, replace frame bumper
SCHEDULE PROFESSIONAL FORK SERVICE * ANNUALLY (Minimum)
Annually, or when problems are indicated you must have your Lefty fork serviced through a Cannondale Dealer
or an Authorized Headshok Service Center. Your fork should be disassembled by a suspension professional and
evaluated for internal and external part wear and damaged parts replaced with new ones. It should also include
any work described in any technical bulletins or product recalls.
PLEASE NOTE: Cannondale provides professional services through Cannondale dealers for Headshok /Lefty suspension forks.
Please ask your dealer about the service programs available for your model fork.
WARNING
FREQUENT MAINTENANCE AND INSPECTION IS IMPORTANT TO YOUR SAFETY. YOU CAN BE SEVERELY INJURED,
PARALYZED OR KILLED RIDING ON A BROKEN OR POORLY MAINTAINED FORK. Ask your Cannondale Dealer to help you
develop a complete fork maintenance program, one that suits where and how you ride.
WHAT TO DO
7-9 Nm, 62-80 In Lbs
NORMAL
BEFORE AND AFTER EVERY RIDE
16
RACE
(In Hours)
AFTER FIRST RIDE
CHECK EVERY 4-5 RIDES
50
50
25
100
AS NEEDED
25
25
25
50