B-K lighting MINI-MICRO RECESSED UPLIGHT Installation Instructions page 3

Finished grade
Flush Mount Installation
Rebar or stake (by others) Stability flange
Rebar or stake (by others)
Concrete
Concrete
Finished grade
Pea gravel or sand
Finished grade
Rebar or stake (by others)
2 window
faceplate Concrete
Finished grade
shown
8. Fill the hole around the fixture housing to
12" below the finished grade with clean fill dirt
and tamp carefully to prevent settling of fixture.
Optical opening on
Pour concrete and finish as required flush with
faceplate will align with
mounting collar.
alignment arrows on
temporary cover
NOTE: The mounting collar must be flush to
finished grade. Use stability flange to aid in
installation as shown.
6" Dia.
(152mm)
7/8"
(22mm)
Finished grade
LINE
Remote
Transformer
COM
Rebar or stake (by others) Stability flange
Concrete
WIRING DIAGRAM
Finished grade
Pea gravel or sand
Rebar or stake (by others)
LED - For use with 12VAC
Concrete
transformer or magnetic transformers only.
Finished grade
B-K Lighting cannot guarantee performance
with third
Finished grade
transformers.
Finished grade
6"
min.
Finished grade
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
B-K LIGHTING
8 3/4"
Stability flange
Pea gravel or sand
Stability flange
Pea gravel or sand
9. Remove temporary cover and pull out low
Wire nuts must
6"
clear opening
min.
Concrete
12V
FIXTURE
COM
11. Mount faceplate to collar using (2) #6-32 screws
Stability flange
remote
Pea gravel or sand
party manufacturers'
faceplate will align with
8 3/4"
Wire nuts must
6" clear opening
min.
Wire nuts must
Concrete
clear opening
Concrete
MINI-MICRO™ RECESSED UPLIGHT
Rebar or stake (by others)
Stability flange
Optical opening on
faceplate will align with Concrete
Finished grade
alignment arrows on
Pea gravel or sand
temporary cover
voltage wire.
(provided) with a 5/64" Allen wrench.
Rebar or stake (by others) Stability flange
Concrete
Finished grade
Pea gravel or sand
Optical opening on
Optical opening on
alignment arrows on
faceplate will align with
temporary cover
alignment arrows on
temporary cover
6"
min.
Finished grade
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
6"
min.
Finished grade
10. Access low voltage wire inside Power Pipe™.
Make two watertight connections using
waterproof wire connectors (By Others). Wire
nuts must clear opening. Insert fixture and
low voltage wire into housing. See wiring
diagram.
Optical opening on
faceplate will align with
alignment arrows on
Wire nuts must
clear opening
Concrete
RELEASE DATE
12-13-16
Wire nuts must
clear opening
Concrete
temporary cover
REFERENCE NUMBER
INS000933
Optical op
faceplate will
alignment
tempo