Advertisement
Quick Links
IMPORTANT INSTRUCTIONS & OPERATING MANUAL
Lexey42,Lexey 50,Lexey 50 WH,
Lexey 60,Lexey 72,Lexey 90
Read and understand this entire owner's manual, including all safety
information, before plugging in or using this product. Failure to do so could
WARNING
result in fire, electric shock, or serious personal injury.
Keep this owner's manual for future reference. If you sell or give this product
CAUTION
away, make sure this manual accompanies this product.
NO VENTING REQUIRED
120V AC; 60 Hz; 1500 Watts
Advertisement
Related Manuals for Valuxhome Lexey 42
Summary of Contents for Valuxhome Lexey 42
- Page 1 IMPORTANT INSTRUCTIONS & OPERATING MANUAL Lexey42,Lexey 50,Lexey 50 WH, Lexey 60,Lexey 72,Lexey 90 Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could WARNING result in fire, electric shock, or serious personal injury. Keep this owner’s manual for future reference.
- Page 2 First make the bulged screw tube on the wall, second put the wall haning on the wall, third fix the wall hanging by self-tapping screws.
- Page 3 Used for Lexey 42,Lexey 50, Used for Lexey 72,Lexey 90 Lexey 50 WH,Lexey 60...
-
Page 4: General Safety Information
GENERAL SAFETY INFORMATION When using this fireplace, basic precau�ons should always be taken to reduce the risk of fire, electric shock and injury to persons, including the following: CAUTION – Due to the high temperature, keep electrical cords, drapery and other furnishings at least 3 feet from the front, side and rear of the fireplace. - Page 5 23. Faulty wall outlet connec�ons may cause the wall outlet to overheat. Be sure that the fireplace plug properly fits into the outlet before each use. During use, make sure the fireplace plug does not overheat. If necessary, have a qualified electrician check and / or replace the wall outlet. 24.
- Page 6 Helpful Advice Before Installation Please retain all packaging un�l you have checked and counted all the parts and other package contents. The package contains small apparatus which should be kept away from young children and infants. We suggest that you move all the smaller parts into a container to reduce the risk of losing them. At least 2 people are required to install this fireplace.
- Page 7 Tools Needed Power drill Screwdriver Installation Do not connect the fireplace to the power supply un�l l properly fixed to the wall and the instruc�ons are carefully read. Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes.
- Page 8 Step Two Make sure the area to be drilled does not have any hidden electrical wires or water and gas pipes. The wall fixings provided is for concrete walls only; please use suitable fixings for your wall type. If in doubt, contact a qualified hardware expert. Place the three bulged screw tubes into the drilled holes and then screw in the self-tapping screws.
- Page 9 Remote Control The remote control requires 2 AAA ba�eries, which are not included. Point the remote control directly at the fireplace. The range is about 11.5 feet. Troubleshooting Problem Possible Solu�on Check if the unit is plugged in the power outlet. ·...
- Page 10 Touch screen panel operation Flame effect Touch the button will show F1,F2,F3 to different colors option. Touch the button will show C1,C2,C3 to different colors option. 1500 1500...
- Page 12 This product is not intended to be used as a primary heat source. It is for supplemental heating purposes only. Model:Lexey 42,Lexey 50,Lexey 50 WH,Lexey 60,Lexey 72,Lexey 90 Power supply:120V-60Hz Power consumption: 1500W...
Need help?
Do you have a question about the Lexey 42 and is the answer not in the manual?
Questions and answers