Start Vehicle - Pedigree Technologies OneView CameraView Installation Manual

Testing / Confirmation
TIE LOOSE CABLES
Cable tie all loose cables together as best as possible to prevent snags or cable movement during
operation. (Not pictured.)

START VEHICLE

Start vehicle outdoors and let run for 3-5 minutes before calling Pedigre support to verify
installation (new Cab-Mate One install only).
USB ON
Upon proper operation and vehicle ignition, the "USB
ON" indicator light on the APMM module will turn on.
CAMERAVIEW ON
After the APMM module turns on, 30-45 seconds
later, the blue light on the front of the CameraView
module will turn on.
PedigreeTechnologies.com | Support: (701)-499-0022
APMM Light
(bottom view)
CameraView light
CameraView