Introduction; General; Requirements - Atmel AVR ONE! Quick Start Manual

1.1

General

This document contains a quick-start guide describing how to get up and running using the AVR
debugger with AVR32 Studio. In addition to the AVR ONE! debugger, you need the following items:
– AVR32 Studio 2.5 software
– AVR32 GNU Toolchain 2.4
– EVK110x Evaluation board
Software and documents can be found at www.atmel.com/avrone
1.2

Requirements

This example was created on a PC running Microsoft
Windows, the behaviour when installing software and drivers may be slightly different.
Please read the AVR32 Studio 2.5 release notes for information about support for other versions of
Windows.
AVR ONE! Quick-start Guide
® ®
Windows XP Professional. For other versions of
Section 1

Introduction

®
ONE!
1-1
32104B–AVR ONE!–02/10