Table of Contents
Advertisement
Dismantle the unit cover.
Unscrew the thermocoupling nut from the safety pilot and pull the copper tube carefully out of the
safety pilot (see the section
Dismantle the base of the burner (
Remove the safety plate (
Pull the burner tube (
Unscrew the thermocoupling (
thermocoupling.
Bend the copper lead of the new thermocoupling carefully in accordance with the procedure for
the defective part.
To install the new thermocoupling, proceed in reverse order.
Ensure the slots are facing upwards when inserting the burner tube (
R
EPLACING THE SPARK PLUG
R
EPLACING THE THERMOCOUPLING
R
„
EPLACING THE GAS THERMOSTAT").
A
): undo the screw and pull down the base of the burner.
B
).
C
) forwards out of the burner.
E
) fastening nut (
Page 10
Dismantle the unit cover.
Pull the igniter cable carefully out of the piezo
igniter. See the section
IGNITER".
Unscrew the spark plug's (
burner body and remove the spark plug with
cable.
To install the new spark plug, proceed in reverse
order. When installing, ensure the spark plug's
electrode lies exactly above the burner pipe's
Slots.
D
) from the burner body and remove the
Page 10
„
REPLACING THE PIEZO
B
A
) screw (
) from the
C
).
Advertisement
Table of Contents
