About Your Pin Code; Changing Your Pin Code - Philips UPC Direct DSR4101/58 User Manual

DSR 4101_02/2005.qxd

About your PIN code

When you first use your set-top box, your PIN code is 0000. In
order to make your PIN code secret, you should change it to a
secret number that you find easy to remember (see below).
To display the Control Settings menu:
1. On the Setup menu, highlight 'Control Settings', and then
press OK.
You will see a message asking you to enter your PIN code.
2. Enter the correct PIN code then press OK.
3. When you have finished using the Control Settings menu,
press BACK to redisplay the Setup menu.

Changing your PIN code

You can change the PIN code to a secret number which you find
easy to remember. Please make sure you do not forget your PIN
code.
To change the PIN code:
1. On the Control Settings menu, highlight 'PIN code
modification' then press OK.
'New PIN code' is highlighted.
2. Use the number buttons to enter a new 4-digit PIN code of
your choice. If you make a mistake, you can press
a digit.
3. Press .
y
'Repeat new PIN code' is now highlighted.
4. Enter your new 4-digit PIN code again.
5. If you change your mind and do not wish to change the PIN
code, press BACK to cancel your changes.
If you want to save the new PIN code, press OK.
30 SETUP
4/02/05 8:13 Page 30
to delete
u