RHINO 2409 Assembly Manual page 2

2-7414
PARTS LIST - MOUNTING KIT
ITEM PART NO.
1 52371
2 51864
3 51861
4 51868
5 42787-1
6 42787-7
7 42787-6
8 41838-64
9 41838-29
10 41838-7
11 41840-8
12 52374
13 39240
14 41838-79
15 41838-27
16 41838-14
17 41838-32
18 41837-7
19 42502-12
20 41840-7
21 41838-78
INSTALLING LOADER TO MOUNTING
BRACKETS
1. Using overhead hoist to support loader remove hard-
ware securing loader to pallet. Lift loader and remove
pallet.
2. Using overhead hoist, lower loader from vertical
shipping position to horizontal position leaving
enough room to install yoke (scraps of cardboard
may be used to protect paint). Install yoke assembly
(12) using 3/4 x 2-1/2" cap screws (8) and 3/4" lock
nuts (11). Lower loader completely to the ground.
7-2-2004
DESCRIPTION QTY.
BRACKET, Front Mounting
CROSS TIE
BRACKET, Midmounting, Right
BRACKET, Midmounting, Left
SPACER TUBE .75"
SPACER TUBE .69"
SPACER TUBE 2.69”
SCREW, Cap, 5/8-11 x 2-1/2
SCREW, Cap, 5/8-11 x 1-1/2
SCREW, Cap, 3/4-10 x 2-1/2
NUT, Lock, 3/4-10
YOKE
DECAL, Do not tow ...
SCREW, Cap, 5/8-11 x 2-3/4
SCREW, Cap, 5/8-11 x 2
SCREW, Cap, 5/8-11 x 2-1/4
SCREW, Cap, 5/8-11 x 1-3/4
WASHER, Lock, 5/8
WASHER, Flat, 5/8
NUT, Lock, 5/8-11
SCREW, Cap, 5/8-11 x 4-1/4
NOTE: Hardware connecting yoke to loader side-
frames should be snug but do not torque completely.
After loader has been mounted to tractor and aligned
with midmounting brackets and front mounting
brackets, torque hardware to 239-262 ft. lb.
3. Install hose or valve kit to tractor and loader. Refer to
assembly manual provided for installation instruc-
2 of 4
1
1
1
1
2
2
2
1
1
4
4
1
2
1
10
2
5
18
8
4
2
F-3978