Advertisement
Battery Installation
• For longer life, use alkaline batteries.
• If the vehicle or remote control begins to operate
erratically, you may need to reset the electronics.
Remove and reinstall the batteries.
Vehicle
• Loosen the screw in the battery compartment
door and remove the door.
• Insert four AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
Remote Control
• Loosen the screw in the battery compartment
door and remove the door.
• Insert two AA (LR6) alkaline batteries.
• Replace the battery compartment door and
tighten the screw.
1,5V x 6
AA (LR6)
Battery Safety
Information
In exceptional circumstances, batteries may leak
fluids that can cause a chemical burn injury or
ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of non-
use. Always remove exhausted batteries from
the product. Dispose of batteries safely. Do not
dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the
product before charging.
• If removable, rechargeable batteries are used,
they are only to be charged under
adult supervision.
2
Advertisement
