Table of Contents
Advertisement
AC Portable System
Panel placard
with full lamp
Optional System Accessories Available
Foam Tank(s)
8 gallon, polypro py lene
(P/N 1530-0005)
12 gallon, polypro py lene
(P/N 1530-0012)
20 gallon, polypro py lene
(P/N 1530-0022)
Requires additional hardware for
com pli ance with the N.F.P.A.
4
What You Supply
ITEMS NEEDED:
1. All fittings are to be 1" NPT and are to be
compatible with the fluids being pumped
(typically brass and/or stainless steel).
2. Hose on the suction side of the foam pump
to be clear 1" ID suction-type hose rated for
23 inches (584mm) Hg vacuum and 50 psi
(3 BAR) working pressure.
3. Hose on discharge side of foam pump to be
1" ID hose with a 50 psi (3 BAR) minimum
working pressure.
4. Foam tank/tanks with two-way vent, sized to
customer's specifications.
Side-mount
Panel Check Valve
level sensor
Power-Fill System
Installation and Operation Manual
Refill wand &
6 ft. suction hose, cam lock
fittings and panel cap
Vertical-Mount
Level Sensor
(P/N 2510-0028)
SYSTEM WIRING
Use the recommended gauge wire specified as
minimum AWG wire. Use wire that is automotive type
and resistant to abrasion and chemicals such as oil and
foam. It is recommended that wiring be bundled with
wire ties and protected with loom.
Pump/Motor Assembly
Strainer
40 Mesh
(P/N 3350-0144)
5
Advertisement
Table of Contents
