Remove The Lcd Flex Cable And Assembly - Nokia 6265i Disassembly

Nokia Customer Care
d. Open the slide assembly to align the UI flex cable slots. Gently pull the upper
main flex assembly and the UI flex cable from the side assembly.

15. Remove the LCD Flex Cable and Assembly

a. With the slide assembly in the closed position, use the SRT-6 opening tool to
gently pry the mechanism from the center slot located at the bottom.
b. Twist the SRT-6 opening tool to separate the assembly.
c. Separate the upper PWB and the LCD assembly from the slide mechanism.
A
d. Using the SRT-6 opening tool, gently open the LCD flex connector.
Issue 1 11/2005
B
©2005 Nokia Corporation
6265/6265i/6268 (RM-66)
C
Company Confidential
Disassembly
Page 13