3155/3155i (RM-41), 3152 (RM-61)
Baseband Description and Troubleshooting
No Audio
• Check for bad contacts or damaged earpiece
• Check for bad connections at mic
• Check for broken or bad solder joint of passive components
• Verify the audio signal paths using BaseBand "audio test" component with
Phoenix as described in the troubleshooting guide
Key Pads Malfunction
• Check for protective film left on back of the key dome if a new one was installed
• Check for corrosion on both the key pads and key dome
• Check if flash software was corrupted
• Check for bad joint from UPP to Interface
• Check for pins shorted on or bad on Z300
No LCD Display
• Check for bad connections
• Check for a cracked or damaged display
• Probe test points as described in the troubleshooting guide for missing for
incorrect signal level
Page 40
©2005 Nokia Corporation
Company Confidential
ISSUE 1 07/2005