6265/6265i/6268 (RM-66)
Disassembly
14. Remove the Main Flex Assembly
a. Using an IP-4 Torx 4 Plus screwdriver, undo the four IP-4 Torx 4 Plus screws
that retain the main flex assembly to the slide assembly.
Note: Do not reuse screws. Discard and replace with new screws for reassembly.
b. Using the SRT-6 opening tool, release the assembly and fold it upwards to
reveal the flex cable underneath.
c. Use the SRT-6 opening tool to disconnect the flex connection.
Page 12
©2005 Nokia Corporation
Company Confidential
Issue 1 11/2005