Switching On The Phone; Charging The Battery - Philips CT9A9FBLK/00 User Manual

Xenium cellular mobile radio gsm 900/1800
Table of Contents

Advertisement

Switching on the phone

To switch on the phone, long-press the
Enter the PIN code if required. A PIN code is a 4- to
8-digit secret code for your SIM card. It is
preconfigured and communicated to you by your
operator or retailer.
If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
,
Customize
Press
your mobile
easily?
,
Select your
Press
melody for
Select the one you want and press
,
incoming
again.
calls
Getting Started
)
to accept customization.
. A list of melodies appears.
Select your
wallpaper?
key.
Select your
address
book (SIM
or phone)

Charging the battery

Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
alert is On.
Once the battery and battery cover are back in place
you can charge the phone. Plug in the connector as
shown below. Then plug the other end into a main
AC power socket.
,
On
Press
. Then select
wallpaper. A list of picture files
appears. Select the one you want and
,
press
again. The word
is displayed.
,
Press
. Then choose either
card
In
phone. Press
or
Customization Completed
The words
is then displayed.
Off
or
for
activated
In SIM
,
again.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct9a9fblk/40Ct9a9fblk

Table of Contents