Table of Contents
Advertisement
When the phone is switched on without a SIM card,
users can access the main menu by pressing
or make SOS emergency number via
Switching on the phone
To switch on the phone, long-press the
Enter the PIN code if required (the 4 to 8 digit
secret code of your SIM card). It is preconfigured and
provided to you by your network operator or retailer.
For more information on PIN code, see "Security" on
page 74.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To unblock
it, you must obtain the PUK code from your network
operator.
Charging the battery
Your phone is powered by a rechargeable battery. The
new battery is partially charged. A sound alert will be
emitted to warn you when the battery level becomes
low.
We recommend that you do not remove the battery
when the phone is switched on as you may lose all your
personal settings as a result. If you do remove it, the
9
date and time settings are only memorized for a short
,
C
while. As such, you need to reset the information after
or
,
c
(
you have installed the battery back again.
or
.
Once the battery and battery cover are installed, you
can charge the phone. Plug in the connector as shown
below. Then plug the other end into an AC power
)
key.
socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll;
it takes around 2.5 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Depending on the network and condition of use,
talk time and stand-by time can go up to 10 hours*
and 1000 hours* respectively.
Getting Started
Advertisement
Table of Contents
