Switching On The Phone; Charging The Battery Via Usb - Philips 960 User Manual

Slide the battery back into the compartment with
metallic connectors downwards, until it stops. Then
lock it by pushing it downwards.
Replace the back cover by pushing it down into its
slots, until it stops.
Remove the protective film covering the screen and
the camera lens before using the phone.

Switching on the phone

To switch on the phone, long press the
the PIN code if required (i.e. the 4- to 8-digit secret
code of your SIM card). It is preconfigured and
communicated to you by your operator or retailer. For
2
more information on PIN codes, see "Security" on
page 53.
If you enter an incorrect PIN code 3 times, your SIM
card will be blocked. To unblock it, you must request
the PUK code from your operator.

Charging the battery via USB

Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery level is low.
Once the battery and the batter cover are clipped on
the phone you can charge the phone. Pull away the
protective rubber cap covering the charger connector
(it is attached to the phone so that you cannot lost it).
Plug in the connector as shown below. Then plug it
into a main AC power socket.
key. Enter
Getting Started