Safety Instructions - SEMAK HD3T Operation And Warranty Booklet

Safety Instructions

 Only use the appliance on a flat, level and stable surface. DO NOT use on a wet
surface.
 When in operation the surfaces of the bun spiker and glass tank are EXTREMLY
HOT
 DO NOT touch the Teflon coated bun spikes while the appliance is in operation.
 ALWAYS turn off the appliance and allow it to cool down before cleaning.
 The spikes remain hot for some time. Allow a minimum 15 minutes COOL DOWN
to ensure that the bun spikes have cooled. NEVER pick up the bun spiker by the
spikes to avoid burns of the hands, fingers, wrists.
 Use a barely damp cloth to wipe the bun spiker once it has cooled.
 DO NOT use running water when cleaning the bun spiker. Wipe the exterior with a
damp cloth.
 DO NOT use caustic substances to clean the appliance and do not allow caustic
substances to make contact with any electrical components of the warmer.
Page | 5