Table of Contents General Safety Instructions for All Semak Products ..........4 Safety Instructions ....................5 Operating Instructions for the Semak Bun Spiker ..........6 Cleaning Instructions for the Semak Bun Spiker ..........7 Spare Parts for the Semak Bun Spiker ..............7 Service &...
Page 3
RETAIN THESE SAFETY INSTRUCTIONS Page | 3...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. NEVER leave the appliance ON unattended. ALWAYS unplug the Hot Dog Spiker after use.
Safety Instructions Only use the appliance on a flat, level and stable surface. DO NOT use on a wet surface. When in operation the surfaces of the bun spiker are EXTREMLY HOT. DO NOT touch the Teflon coated bun spikes while the appliance is in operation. ...
Operating Instructions for the Semak Bun Spiker Make sure that the switches are in the “OFF” position. Plug into an earthed 220-240V AC power supply. Turn the switch for the corresponding bun spikes on. The indicator switch will light up when “ON”.
75210 LEAD & PLUG Spare Parts, exploded views and wiring diagrams are available from our webpage. Go to www.semak.com.au and locate the appliance in the product section for the above information. Service & Maintenance For Service and Repair, contact Semak for your nearest Authorised Service Agent The Foodservice Industry is deemed a hostile environment within the scope of AS/NZS 3760:2003.
CISPR 14 Warranty The Semak Bun Warmer is a Commercial appliance. This product is guaranteed for 12 Months from the date of purchase against mechanical and electrical defects. If the fault is deemed caused by MISUSE/ABUSE the terms of the warranty are invalidated.
Page 9
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...