Advertisement
WHAT HAPPEN WHEN MEMORY IS FULL?
•
The Screen Display will show "Fu".
•
When your phone rings, Elegance 55 will answer "Memory
full, please call later."
•
The outgoing message will not play and the machine will not
record any messages.
Reminder : It is time for you to erase some of your recorded messages.
Follow the sections below.
SELECTIVELY ERASING YOUR RECORDED
MESSAGES
1. Press once the PLAY/STOP BUTTON
to play your
recorded messages.
2. While your message is playing, press once the ERASE
BUTTON
.
Result : The next message, if any, will be played automatically. Repeat
step 2 if you also want to erase the message.
11
ERASING ALL YOUR RECORDED MESSAGES
Press and hold the ERASE BUTTON
until a long beep is heard,
then release the ERASE BUTTON
. The Screen Display will
show "ES", followed by "0", which means no messages.
RESTORING ALL ERASED MESSAGES
Notes :
•
This can only apply to all erased messages and not to selectively
erased messages.
•
Erased messages can only be restored provided that no new message
is recorded immediately after the erase.
Press and hold the ERASE BUTTON
until a long beep is heard,
then release the ERASE BUTTON
. The Screen Display will
show "SA", followed by the pre-erased total number of recorded
messages.
12
55 eleg. (UK) P. 2 a – V3
CHANGING YOUR REMOTE CONTROL
SECURITY CODE
Your Elegance 55 comes with a factory default security code of
159, which can be changed to any 3-digit combination ranging
from 000 to 999. This security code is for your use to remotely
access and control your answering machine from another phone.
Note : You can stop changing the security code anytime by pressing
once the PLAY/STOP BUTTON
. It will restore to its previous
setting.
MEMO
OGM
:
or
MEMO
OGM
:
or
MEMO
OGM
:
or
13
1. Press and hold the ON/OFF BUTTON
until a long beep is
heard. The Screen Display will show "Sc".
2. Release the ON/OFF BUTTON
. The Screen Display will
show the previous security code in sequence, then will stop at
the first digit of the security code for you to change.
MEMO
OGM
3. Press either the FORWARD
or REWIND BUTTON
to choose the first digit for your new security code. Press
once the ON/OFF BUTTON
to confirm your choice. The
Screen Display will automatically show the second digit of the
security code.
MEMO
OGM
4. Press either the FORWARD
or REWIND BUTTON
to choose the second digit for your new security code. Press
once the ON/OFF BUTTON
to confirm your choice. The
Screen Display will automatically show the last digit of the
security code.
MEMO
OGM
5. Press either the FORWARD
or REWIND BUTTON
to choose the last digit for your new security code. Press
once the ON/OFF BUTTON
to confirm your choice.
Note : If Elegance 55 has no battery installed or has battery low
status, occurrence of power failure will result to all the recorded
messages and your changed remote control security code to
be lost from memory. In this case, the factory default security
code of 159 will be restored automatically after resumption of
power supply.
Reminder : For the instructions to remotely access and control your
Elegance 55 from another phone, please refer to the
Remote Control Reference Card enclosed.
14
SAFETY INFORMATION
The only way to cut off the power supply to the telephone /
answering machine is to disconnect the power supply block from
the mains outlet. Be sure that the mains outlet is located near the
telephone device and is easily accessible.
The CE mark on the product certifies its compliance with all
applicable technical regulations, as of the date of authorization,
concerning user safety and electromagnetic interference according
to directives 73/23/EEC, 89/336/EEC and 93/68/EEC.
Always follow basic safety precautions when using this product to
reduce the risk of injury, fire, or electric shock.
1. Read and understand all instructions in the user's
manual. Observe all markings in the product.
2. During thunderstorms, avoid using telephones except
cordless models. There may be a slight chance of electric
shock from lightning.
3. Do not use a telephone in the vicinity of a gas leak. If
you suspect a gas leak, report it immediately, but use a
telephone away from the area where gas is leaking. If this
product is a cordless model, make sure the base is also away
from the area.
4. Do not use this product near water, or when you are
wet. For example, do not use it in a wet basement or shower,
or next to a swimming pool, bathtub, kitchen sink, or laundry
tub. Do not use liquids or aerosol sprays for cleaning. If the
product comes in contact with any liquids, unplug any
15
line or power cord immediately. Do not plug the product
back in until it has dried thoroughly.
5. Install this product in a protected location where no
one can trip over any line or power cord. Protect cords from
damage or abrasion.
6. If this product does not operate normally, read the
instruction in the user's manual. Do not open this
product! Opening the product or reassembling it incorrectly
may expose you to hazardous voltages or other risks.
7. If this product has user replaceable batteries, replace
batteries only as described in your user's manual. Do
not burn or puncture batteries – they contain caustic chemicals.
8. If this product has a three-prong (grounding) plug or a
polarized plug with one wide prong, it may not fit in non-
polarized outlets. Do not defect the purpose of these plugs. If
they do not fit in your outlet, the outlet should be replaced by
an electrician.
CAUTION: Use only the power adapter provided with this
product. To obtain a replacement, call Philips Consumer
Communications.
ELECTRICAL CONNECTION:
Mains power supply 220-240 volts, single-phase AC, except
for installations with the IT diagram as defined in standard
EN 60-950. Important! The voltage of the network is
classified as hazardous according to the criteria of standard
EN 60-950.
TELEPHONE CONNECTION:
The voltages used on this network are classified as TRT-3
(telecommunications network voltage as defined in standard
EN 60-950).
16
55 eleg. (UK) P. 2 b – V3
CONNECTION INSTRUCTIONS:
The answering machine, Philips Elegance 55 (TD9368), is designed
for connection to the analogue public switched telephone network
(PSTN) only.
CONNECTION CONFIGURATION:
The answering machine, Philips Elegance 55 (TD9368), can be
used as a single device and/or as part of a configuration with other
pre- or post- connected type-approved terminal equipment.
NEW INSTALLATION OR REPLACEMENT OF THE BATTERY:
CAUTION: Disconnect the telephone line plug from the
wall socket before opening the battery compartment
door. Unscrew the compartment door and connect a new 9 volts
battery to the polarized battery tap. Replace and fasten the battery
compartment door before reconnecting the telephone line plug.
Do not install or replace any telephone device during
thunderstorms!
RINGER EQUIVALENCE NUMBER (REN):
Your Elegance 55 (TD9368) has a Ringer Equivalence Number
(REN) of 1.0. To determine the maximum number of telephones
that can be connected to your line, add together the individual
RENs of the apparatus you wish to connect. If this total exceeds
four, one or all of your telephones may not ring correctly.
17
This product may be used legally in the country where the
appropriate authority has given its specific authorization. This
authorization appears on a label on the base station.
In the interest of improving our products and services, Philips
reserves the right to alter the specifications without prior notice.
18
UK
Your international guarantee
Dear Customer,
Thank you for purchasing this Philips product which has been designed and manufactured to
the highest quality standards.
If, unfortunately, something should go wrong with this product Philips guarantees free of
charge labour and replacement parts irrespective of the country where it is repaired during a
period of 12 months from date of purchase. This international Philips guarantee complements
the existing national guarantee obligations to you of dealers and Philips in the country of
purchase and does not affect your statutory rights as a customer.
The Philips guarantee applies provided the product is handled properly for its intended use, in
accordance with its operating instructions and upon presentation of the original invoice or
cash receipt, indicating the date of purchase, dealer's name and model and production number
of the product.
The Philips guarantee may not apply if :
• the documents have been altered in any way or made illegible ;
• the model or production number on the product has been altered, deleted, removed or
made illegible ;
• repairs or product modifications and alterations have been executed by unauthorised service
organisations or persons ;
• damage is caused by accidents including but not limited to lightning, water or fire, misuse
or neglect.
Please note that the product is not defective under this guarantee in the case where modifications
become necessary in order for the product to comply with local or national technical standards
which apply in countries for which the product was not originally designed and/or manufactured.
Therefore always check whether a product can be used in a specific country.
In the event you require service whilst in another country a dealer address can be given to
you by the Philips Consumer Help Desk in that country.
In order to avoid unnecessary inconvenience, we advise you to read the operating instructions
carefully before contacting your dealer.
In case your Philips product is not working correctly or is defective, please contact:
PHILIPS CONSUMER COMUNICATIONS
PO BOX 1056
Kingston & Surbiton
Surrey
KT1 6YN
Phone : 0645 282828
55 eleg. (UK) P. 2 C – V3
Advertisement
