Table of Contents
Advertisement
Available languages
Available languages
Power supply
The scale is powered by a 1 x 3 V (CR2032) lithium battery. Before using for the first time, open the
battery compartment and remove the protective film from the battery.
Weighing
1.
Attach the strap around the luggage handle and secure the strap hook in the triangular ring.
2.
Press the
button to turn on the scale before lifting (do not load).
3.
Once "0" appears in the display, press the
4.
Carefully lift the scale. Make sure that the scale is horizontal and balanced. The weight of the
luggage will be shown in the LCD display. Wait until the reading stabilises, flashes three times
and "locks". The scale shows the recorded weight for 2 minutes and then automatically turns
off.
5.
Once the weight reading has "locked", press the
now weigh another bag.
6.
Press and hold the
Change weight unit
1.
Once the scale is turned off, press the
appears in the LCD display, then release. The weight unit flashes.
2.
Press the
button to select weight unit. After 3 seconds without activity, the weight unit will
be set and you can start weighing.
Warning indicators
1.
Replace the battery
2.
The scale is overloaded. Remove the luggage to avoid damage. The weight capacity is
specified
on the scale.
Replacing the battery
Replace the battery when "Lo" appears in the LCD display. Open the battery compartment cover on
the rear of the scale:
1.
Remove the used battery using a pointed object
2.
Fit a new battery by inserting one side of the battery under the battery flap and then pressing
down the other side. NB: Insert the battery with the correct polarity.
OPERATION
button again to reset the LCD display.
button for 3 seconds to turn off the scale.
-button and keep it pressed for 3 seconds until "0"
button to reset the LCD display. You can
EN
17
Advertisement
Table of Contents
