Advertisement
Available languages
Available languages
ENGLISH
Read the User Instructions carefully before use.
Capacity: 44 kg, 20 g/50 kg, 20 g
Overload indicator: O-LD
Unit: kg, Ib, oz, g
Button functions:
ON/TARING (
):
UNIT:
Reset:
Low battery voltage: LO is shown on the display. Replace batteries.
Automatic power OFF: The appliance switches off automatically if it has not been used for 30
seconds.
Batteries: 2 x AAA (3 V)
Use
1.
Place the scale vertically without weight on the hook.
2.
Start the appliance with the button
select the required unit.
3.
Hang what is to be weighed on the hook, wait for the value to stabilise and read off.
4.
Switch off the appliance with the button
Calibration
1.
Hold the appliance vertical and switch off.
2.
Press the buttons UNIT and
both buttons.
3.
Press
again. The display shows CAL and then 20.00. Hand a calibration weight of 20 kg on the
hook. PASS and 20.00 is shown when the value has stabilised.
4.
The calibration is now completed.
Display messages
1.
"LO" : Replace batteries.
2.
O-LD: Overloaded. Remove the weight immediately from the hook, otherwise the appliance can be
damaged.
3.
OUT2: The load cells are damaged.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
DESCRIPTION
-Press once to start scale.
-Press to switch off.
-Press to reset/tare the scale.
-Press and release to switch displayed unit.
-Press to reset the appliance.
OPERATION
. The display shows HELLO and then 0.00. Press UNIT to
. The display shows HELLO and then a numerical value. Release
ENGLISH
. The display shows BYE and the appliance switches off.
5
Advertisement
