Advertisement
Composition article
No.
4GB DIMM
1
8GB DIMM
2
DDR3-1600 REG Memory Kit User's Guide
Caution
Follow these notes when you install the Memory Kit.
Do not put the Additional Memory in a dusty place.
Do not put the Additional Memory in a place where water or liquid is likely to splash onto the board.
Do not put the Additional Memory in a place where steam of sulfur occurs in the air.
Do not put the Additional Memory in magnetic field.
Do not touch any terminal pin of Additional Memory.
When the standard memory is carried "memory mirroring function", a "memory lock step function"
cannot be used.
Transfer to Third Party
Make sure to provide this manual and all the accessories along with the product to a third party.
Installing or Uninstalling an Internal Optional Device
Notes before carrying out the work
(1) To avoid electric hazard and malfunction, be sure to turn off the Power switch of this product and
unplug the power cord from an outlet before carrying out the work. However, there is no need to do
this if the internal optional device is hot-swappable.
(2) This internal optional device consists of static-sensitive electronic components. To avoid failures
caused by static electricity when installing or uninstalling the internal optional device, wear an
anti-static wrist strap on your wrist and provide earthing before carrying out the work. And also
connect a wrist strap to earth ground when you wear a wrist strap.
(3) Handling of cables
When connecting a cable (e.g., LAN cable), static electricity may also be charged due to friction
against the floor. Connecting a charged cable with an I/O device may cause damage to the devices.
It is recommended to discharge static electricity before connecting a cable by using neutralization
apparatus and so on.
Name
Number
Comment
N8102-
589F
592F
2
－
2
－
1
This book.
855-911106-589-00-1
Advertisement
