Advertisement
Continue this process for every desired duty function
11
for the selected channel. If it is desired to disable any
duty function in the timing cycle set that duty function's
time value to "0:00".
If any duty function is set to the value of "0:00", it
and all duty functions following it will be disabled.
Repeat steps 2-12 to program any of the other seven
13
channels.
To cancel any operation in progress while in Run
Mode (only), press the related channel button three
times in quick succession. Program Mode does not
support cancellation of any operation.
Procedure Complete
Resetting to Factory Defaults
Unplug the unit. Press and hold the PRINCE CASTLE logo button and
the UP and DOWN buttons simultaneously. Then, plug it in again.
All previously saved settings are lost upon resetting the
defaults! Use with caution.
Using ONLY a clean damp cloth, wipe the face and other
surfaces of the 755-HM8 timer unit, as necessary. If desired, a
mild soap may also be used.
755-502revA
12
14
Miscellaneous Settings
Press and hold the DOWN ARROW button (approx. 6-8 secs.) until the
display shows VOL. Adjust the volume, as desired (1-3). To save the
new setting, press the PRINCE CASTLE logo button.
Cleaning
NEVER use chemicals and/or degreasers of any kind!
Long-term use of certain chemicals has a negative effect on
the surface of the timer, making it brittle and easily
damaged.
5
Multi-display 8-Channel Timer
When the desired programming for the selected channel
has been completed, briefly press the PRINCE CASTLE
logo button. The displays again all show "PRGM, and a
beep sounds.
While in the programming mode, if no buttons are
pressed for a period of 1 minute, the timer
automatically exits the programming mode and all
displays are changed from "PRGM" to "- - - -".
To exit the programming mode, press the PRINCE
CASTLE logo button.
The displays change from "PRGM" to "- - - -".
Changing Audio Settings
755-HM8
Printed in USA 3/06 © 2006
Advertisement
