Advertisement
Multi-display 8-Channel Timer
755-HM8
ALARM: If the alarm setting for this duty function is to
6
be programmed press the button next to the display
showing "ALRM". The currently programmed setting for
this duty function shows only in the display of the
selected channel. To change the alarm setting, press the
UP ARROW or the DOWN ARROW button to scroll
through the following selections:
•
OFF = no alarm
•
CONT = alarm must be manually cancelled but the next
duty function begins timing automatically after alarm is
first triggered
•
STOP = alarm must be manually cancelled & only then
does the next duty function begin
•
5X = Alarm automatically cancels after 5 secs.
NAME: Each duty function can be assigned a function
8
name. If the name setting for this duty function is to be
programmed press the button next to the display showing
"NAME". The currently programmed setting for this duty
function shows only in the display of the selected
channel.
To change the name setting, press the UP ARROW or the
DOWN ARROW button to scroll through the following
selections:
•
COOL
•
DR_N
•
FL_T
•
FRY
•
HOLD
•
HLD1
•
HLD2
•
MISC
ALERT: Each duty function contains a programmable,
10
distinctive sounding, interim alert. This alert can be set
anywhere within the time value of each duty function. If an
alert time value for this duty function is to be programmed,
press the button next to the display showing "ALRT". The
currently programmed time value for this duty function
shows only in the display of the selected channel.
To change the alert time for this duty function, press the
UP ARROW button to increase the programmed time or
press the DOWN ARROW button to decrease the
programmed time. Holding down the UP ARROW or DOWN
ARROW buttons automatically increases or decreases the
programmed time.
When the desired time is showing in the channel display
press the button next to the display showing "ALRT" to
save the value. To exit without saving the new time value
press the PRINCE CASTLE logo button.
Printed in USA 3/06 © 2006
Holding down either the UP ARROW or DOWN ARROW
7
buttons automatically scrolls through the possible
selections. When the desired setting is showing in the
channel display press the button next to the display
showing "ALRM" to save the setting.
To exit without saving the new time value press the
PRINCE CASTLE logo button.
Holding down either the UP ARROW or DOWN ARROW
9
buttons automatically scrolls through the possible
selections. When the desired setting is showing in the
channel display press the button next to the display
showing "NAME" to save the setting. To exit without
saving the new time value press the PRINCE CASTLE
logo button.
The maximum alert time setting is 5 secs. less than the
corresponding duty function time and the minimum alert
time setting is 5 secs. Pressing the DOWN ARROW when
the alert time is at 5 secs. sets it to 0, which disables the
alert for this duty function. If the duty function time is set
less than its corresponding alert time, the alert is disabled
and the alert time set to 0:00. After any duty function time
change adjust the alert time setting to maintain the correct
timing relationships.
4
755-502revA
Advertisement
