Bosch HDD80050UC Installation Instructions Manual page 18

2. Connect ductwork (and transition, if required) to lex blower
or downdraft. If necessary, use (2) #8-18 x .375 (9.5mm)
Note: Regardless of blower placement/exhaust, ensure
to make sure it has suficient circuit protection. The voltage
installation (see rating plate).
Only a qualiied electrician following all appropriate
Have a qualiied electrical technician check the grounding
The downdraft with the Flex Blower (purchase separately)
and DHG6023RUC (purchase separately) draws 5.0 Amps
(max.) and requires a 120 VAC, 60 Hz circuit.
The downdraft has a 30-in. (762mm) long power cord with