Bosch HDD80050UC Installation Instructions Manual page 15

Installation using lexible blower
B - Installation using lexible or remote
C - Installation using lexible or remote
Installation using lexible blower
(Purchase Model DHG602DUC Flexible Blower
separately.)
1. Remove hex nuts to remove front panel cover.
2. Determine whether lex blower will discharge to the left,
5. Tighten hex nuts to secure blower in place.
remove (4) #8-32 hex nuts
6. Remove bolts from lex blower housing. Attach blower
support legs to lex blower housing with these (4) bolts.
If lexible blower is mounted as an inline blower: Do
add extra support for the lexible blower.
1. Remove hex nuts to remove front panel cover.
2. If blower discharge is down, remove (4) #8-32 hex nuts
Place 6" or 8" (152mm or 203mm) round rough-in plate
(purchase separately) over studs around front panel
Tighten hex nuts to secure remote discharge plate in place.
(4) BOLTS