Operation - Kenmore 111.83532 Use & Care Manual

Operation

SETTING THE CLOCK
When the oven is first plugged in, the display will show " : 0" and a tone will sound. If the AC
power ever goes off, the display show " : 0" when the power comes back on.
1. Press the CLOCK pad. The ENTER, TIME indicators blink and "12H" is displayed.
• This is a 12 hour clock system.
2. Press the CLOCK pad once more. "24H" is displayed.
• This is a 24 hour clock system.
• This oven has multiple clock systems. If you want 12 hour clock system, omit this step.
3. Enter the correct time of day by pressing the number pads in sequence.
• If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59.
If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.
4. Press the CLOCK pad. The display stops blinking, and the colon starts blinking.
NOTE: (1) If you attempt to enter an incorrect time, the time will not be set and an error signal
tone will sound. Press the CLOCK pad and re-enter the time.
(2) If you want to set power save mode, press and hold CLOCK pad for 3 seconds.
For detailed information on this feature, see Operating Basics section, page EN-23.
EN-11