Light Replacement - Kenmore 111.83532 Use & Care Manual

Light Replacement

Cooktop Light
When replacing the cooktop light, make sure that you are wearing gloves to avoid injury from the
heat of the lamp.
1. Unplug the oven or turn off the power
at the main power supply.
2. Remove the screw from the light cover
and lower the cover until it stops.
3. Gently unscrew the bulb(s). Be sure
bulb(s) to be replaced are cool before
removing.
4. Replace with 30-watt incandescent
bulb(s) available by calling the
Customer Assistance number 1-800-
488-1222. Standard 30 watt
appliance bulbs available from
supermarkets or hardware stores may
also be used.
5. Replace the light cover and mounting
screw.
6. Turn the power back on at the main
power supply.
Oven Light
When replacing the oven light, make sure that you are wearing gloves to avoid injury from the
heat of the light.
1. Unplug the oven or turn off the power
at the main power supply.
2. Remove the vent grille mounting 3
screws and open the door.
3. Slide the grille air to the left, then pull
it straight out.
4. Remove the charcoal filter, if present
EN-26