Dial Mode; Recall Mode; Auto-Prefi - Philips SE1402B/05 User Manual

You can now adjust the
4
dial mode or press
return to standby.

6.4 Dial mode

The default SE140 dialling mode
is suitable for your country and
network. It is unlikely that you
should need to change this setting.
Press four times.
1
The display shows
-2- .
Press or
2
between 1 = Tone and
2 = Pulse.
Press to save the settings.
3
You can now adjust the
4
recall mode, see below,
or press
standby.

6.5 Recall mode

The button is used with
certain network services and
PABX*/switchboard services.
You will not normally need
to change this setting unless
advised to do so.
26
to
-1- or
to switch
to return to
Note
The use of your SE140 cannot
be guaranteed on all PABX.
Press fi ve times.
1
The display shows
and the current setting
Press or
2
between 1 (Flash 1 with Time
break recall, or 2 (Flash 2
with Time break recall).
Press to save the settings.
3
You can now adjust Auto-
4
prefi x or press
return to standby.
6.6 Auto-prefi x
You can set the SE140 to detect
a dialling number and replace it
with another number. The total
of both numbers together can
be up to a maximum of 24 digits.
Press six times.
1
The display shows (
).
-----
In the fi rst set of spaces,
2
enter the number you want
to be detected (max. 4 digits).
Press or
the cursor.
FLASH
to switch
to
---- - --
to move
Personal settings