Base Settings; Ring Settings (D275 Only); Deregister The Handsets; Set Dial Mode - Philips D270 User Manual

13 Base settings

Ring settings
Note
Available only for D275.
Set the base's ringtone volume
You can select among 5 ringtone volume
levels or [OFF].
Note
• If the ringer volume is set to off, the base
is silenced for all incoming calls.
1
Press .
2
Select [BS SETTINGS] > [RING VOLUME],
then press
3
Select a volume level, then press
confirm.
The setting is saved.
Set the base's ringtone
You can select from 5 ringtones.
1
Press .
2
Select [BS SETTINGS] > [BS RINGER],
then press
3
Select a volume level, then press
confirm.
The setting is saved.
to confirm each selection.
to confirm each selection.

Deregister the handsets

1
Press
2
Select [BS SETTINGS] > [DELETE HS],
then press
[PIN? - - - -] displays; the "- - - -"
cursor flashes. Default 4-digit PIN is
0000.
To erase a character, press
The PIN will be masked as ****.
3
Enter the 4-digit PIN and then press
to confirm.
The deleted handset will be
removed from the registered
handsets list, and the antenna icon
will disappear. [REGISTER] displays.
Note
• The preset PIN is 0000. If the PIN is
incorrect, the deregistration fails and the
screen returns to the previous menu.
• A handset cannot deregister itself.
to

Set dial mode

The phone supports tone (DTMF) and pulse
(rotary) dial. The dial mode is preset to touch
tone dialing. If you have pulse (rotary) service,
you need to change the dial mode to pulse
dialing before using the telephone to make
a call.
1
Press
2
Select [BS SETTINGS] > [DIAL MODE],
to
then press
3
Select [TONE] or [PULSE], then press
to confirm.
The setting is saved.
.
to confirm each selection.
.
to confirm each selection.
.
EN 31