Related Manuals for Philips SE4354S/05
Summary of Contents for Philips SE4354S/05
-
Page 1: Quick Start Guide
Welcome Quick start guide Connect Install Enjoy... -
Page 2: What's In The Box
What’s in the box Handset Line cord User Guide The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries. - Page 3 Connect Connect the base station 1. Place the base station in a central location near the telephone line socket and electricity sockets. 2. Connect the line cord and the power cable to the proper connector at the back of the base station. 3.
- Page 4 Enjoy Make a call Enter the phone number and press Press and enter the phone number. Answer a call When the phone rings, press End a call Press key. Adjust earpiece volume during a call Press to select from Volume 1 Set the ring melody 1.
- Page 5 Switch the handset On/Off Press and hold key for 5 seconds to switch off the handset in stand-by mode. Short press key to switch on the handset again. Keypad lock/unlock Press and hold key for 2 seconds to lock and unlock keypad in stand-by mode. Paging 1.
-
Page 6: Troubleshooting
• (CLI) service does not work Need help? User Manual Refer to the User Manual that is supplied with your SE430/435. Online help www.p4c.philips.com Solution Check the connections • Charge the batteries for at least 24 hours • Use the line cable provided •...