Care And Cleaning - Wolf Gourmet WGBL200S Use & Care Manual

CARE AND CLEANING

Care Recommendations
WARNING
Electrical Shock Hazard
Disconnect power before cleaning. Do not
immerse cord, plug, base, or motor in water
or other liquid.
BEFORE CLEANING
Unplug cord.
1.
Lift blender jar assembly off the base.
2.
Remove emulsion cap assembly and lid.
3.
CLEANING
Base, Cord
Blender Jar
Blender Lid,
Emulsion Cap
Assembly,
Tamper, Jar Pad
Recommendations
• To maintain the aesthetic characteristics
of the blender jar, carefully wash and dry
immediately after every use.
• Use of a soft brush, like a baby
bottle brush, and dish detergent are
recommended for removal of tough oils
or stubborn ingredients from the jar and
may be helpful in cleaning beneath the
jar blades.
|
14 Wolf Gourmet Customer Care 800.222.7820
Wipe with a damp cloth or sponge. Do not use abrasive or corrosive cleaners.
HAND-WASH ONLY. Alternative is to fill jar halfway with water and add 2–3 drops
of dish soap. Blend for 30 seconds. Rinse and dry thoroughly.
For a more thorough cleaning, sprinkle 1/4 cup (59 ml) baking soda in Blender.
Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling subsides,
add 2 cups (473 ml) water and blend on the SOUP cycle. Wash any remaining
residue with dish soap and water. Rinse and dry thoroughly.
These items can be washed in a dishwasher. DO NOT use the "SANI" setting
when washing in the dishwasher. "SANI" cycle temperatures could damage
product. Parts may also be washed with hot, soapy water. Care should be
taken when handling the cutting blade assembly since it is very sharp. Rinse
and dry thoroughly.
• Use a dish towel or soft cloth for drying.
• If the jar does not appear clean after the
first wash, repeat.
• Avoid the use of abrasive or rough
cleaners, scouring pads, brushes,
and steel wool since they will cause
scratches during the cleaning process.
• Soaking your jar in vinegar or a 10%
bleach solution (up to 8 hrs) may be
helpful in removing some stains or signs
of cloudiness.