Advertisement
Care Recommendations
WARNING
Electrical Shock Hazard
Disconnect power before cleaning. Do not
immerse cord, plug, base or motor in water
or other liquid.
BEFORE CLEANING
Unplug cord.
1.
Lift blender jar assembly off the base.
2.
Remove emulsion cap assembly and lid.
3.
CLEANING
Base, Control
Wipe with a damp cloth or sponge. Do not use abrasive or corrosive cleaners.
Panel, Cord
Blender Jar
HAND WASH ONLY. One method is to fill jar halfway with water and add 2–3
drops of washing up liquid. Blend for 30 seconds. Rinse and dry thoroughly.
For a more thorough cleaning, sprinkle ¼ cup (59 ml) baking soda in blender.
Add 1 cup (237 ml) white vinegar. Mixture will bubble. When bubbling subsides,
add 2 cups (473 ml) water and blend on the SOUP cycle. Wash any remaining
residue with washing up liquid and water. Rinse and dry thoroughly.
Blender Lid,
These items can be washed in a dishwasher. DO NOT use the "SANI" setting
Emulsion Cap
when washing in the dishwasher. "SANI" cycle temperatures could damage
Assembly,
product. Parts may also be washed with hot, soapy water. Care should be
Tamper, Jar Pad
taken when handling the cutting blade assembly since it is very sharp. Rinse
and dry thoroughly.
Recommendations:
•
To maintain the aesthetic characteristics
of the blender jar, carefully wash and dry
immediately after every use.
•
Use of a soft brush, like a baby
bottle brush, and dish detergent are
recommended for removal of tough
oils or stubborn ingredients from the
jar and may be helpful in cleaning
beneath the jar blades.
16
•
Use a dish towel or soft cloth for
drying.
•
If the jar does not appear clean after
the first wash, repeat.
•
Avoid the use of abrasive or rough
cleaners, scouring pads, brushes
and steel wool since they will cause
scratches during the cleaning process.
•
Soaking your jar in vinegar or a 10%
bleach solution (up to 8 hrs) may be
helpful in removing some stains or signs
of cloudiness.
Advertisement
