Renault F4R Manual page 401

Air inlet flap: Removal - Refitting
F9Q
Essential equipment
diagnostic tool
Tightening torquesm
damper valve bolts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
a Remove:
- the engine cover,
- the engine undertray bolts,
- the engine undertray,
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the headlights (see Front headlight: Removal -
Refitting) (80B, Headlights),
- the frontal impact cross member (see Front im-
pact cross member: Removal - Refitting) (41A,
Front lower structure),
- the front bumper supports (see Front bumper
support: Removal - Refitting) (42A, Front upper
structure).
FUEL MIXTURE
10 N.m
12A-14
a Remove:
- the bolts (1) of the engine wiring channel,
- the bonnet catch (see Bonnet latch: Removal -
Refitting) (52A, Non-side opening element mecha-
nisms).
12A
135647