Renault F4R Manual page 356

TOP AND FRONT OF ENGINE
Camshaft dephaser: Removal - Refitting
F4R
a Fit a stud on the camshaft dephaser hub.
a Check that the camshaft dephaser hub is correctly
mechanically secured using a tubular hexagon box
spanner (the hub must not be able to rotate to the
left or right).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the camshaft dephaser,
- the camshaft dephaser bolt.
a Position the (Mot. 1801).
a Torque tighten the camshaft dephaser bolt (100
N.m).
a Fit a new blanking cover on the camshaft dephaser.
a Torque tighten the new blanking cover on the
camshaft dephaser (15 N.m).
a Remove the (Mot. 1801).
III - FINAL OPERATION
a Refit:
- the timing belt (see 11A, Top and front of engine,
Timing belt: Removal - Refitting, page 11A-29) ,
- the right-hand suspended engine mounting (see
19D, Engine mounting, Right-hand suspended
engine mounting: Removal - Refitting, page
19D-18) ,
111339
- the scoop under the scuttle panel grille (see Scoop
under scuttle panel grille: Removal - Refitting)
(56A, Exterior equipment),
- the scuttle panel grille (see Scuttle panel grille:
Removal - Refitting) (56A, Exterior equipment),
- the windscreen wiper arms (see Windscreen wi-
per arm: Removal - Refitting) (85A, Wiping -
Washing),
- the engine tie-bar (see 19D, Engine mounting,
Lower engine tie-bar: Removal - Refitting, page
19D-33) ,
- the crankshaft accessories pulley (see 11A, Top
and front of engine, Crankshaft accessories
pulley: Removal - Refitting, page 11A-15) ,
- the accessories belt (see 11A, Top and front of
engine, Accessories belt: Removal - Refitting,
page 11A-7) ,
- the radiator mounting cross member (see Radiator
support cross member: Removal - Refitting)
(31A, Front axle components),
111340
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection),
- the front section of the front wheel arch liners (see
Front wheel arch liner: Removal - Refitting)
(55A, Exterior protection),
- the front wheels (see Wheel: Removal - Refitting)
(35A, Wheels and tyres),
- the engine undertray,
- the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
11A-182
11A