Page 1
Installation and User Guide 1. Introduction The HSTIRFN Wireless Controller can control all ʻWXʼ and ʻRFʼ products. If the HSTIRFN is controlling ʻRFʼ products the following functions are not available: Reduced heat output Fan function The HSTIRFN can control multiple ʻWXʼ and ʻRFʼ products at the same time.
Page 2
3. Pairing HSTIRFN with heaters (cont’d) HSTIRFN HSTIRFN to set hours. , the MON will flash. HSTIRFN 6. S Touch and hold Touch the I3984093 Iss 01...
Page 3
15. Touch to set temperature. 16. Touch The HSTIRFN has a 7-day timer with up to 6 programming steps available for each day. In the programming you can set a start time and a temperature for each programme. Each programme has to be used or set inactive.
Page 4
19. Choosing a position in a room 1. To use a copy day function, enter the programming The HSTIRFN should be fixed to the wall or used with the table mode. top bracket. Avoid areas with draught or direct sun. Do not 2.
Page 5
23 Open indow etection ower adapter for fixed installation waste heating the outside controller is supplied with a power adapter world, the heater is with optional open / closed that will fit a 35mm or a 25mm metal or window heater recognises sudden drops in power adapter should be connected to a wiring...
Need help?
Do you have a question about the HSTIRFN and is the answer not in the manual?
Questions and answers