Paradyne FrameSaver 9620 Installation Instructions Manual page 7

Connecting the COM Port to a User Interface
1. Configure the async or VT100-compatible terminal or PC to be compatible with the
access unit:
— Baud Rate set to 19.2 kbps.
— Character length set to 8 data bits.
— Parity set to none.
— Stop bit set to 1.
— Flow Control set to None.
2. Insert the 8-pin end of the cable into the COM port.
3. Insert the other end of the cable into the user interface (VT100-compatible terminal
emulation) connector.
COM Port-to-Terminal/Printer
Cable or
COM Port-to-PC Cable
*
4. Press Return on the keyboard to display the Main Menu. If you need to configure
for other than a direct link, see the FrameSaver 9620 Technical Reference
(Document No. 9621-A2-GH30).
COM
P O
R T
2
C O
M
98-16094
7